Fujitsu M2704S/M2705S/M2706S:Switch Settings

PCA Layout  All configurations marked * are default settings.

Set SCSI ID

JMP7     JMP6     JMP5     ID
    OPEN     OPEN     OPEN      0
    OPEN     OPEN     SHORT     1
    OPEN     SHORT    OPEN      2
    OPEN     SHORT    SHORT     3
    SHORT    OPEN     OPEN      4
    SHORT    OPEN     SHORT     5
    SHORT    SHORT    OPEN      6
    SHORT*   SHORT*   SHORT*    7

The drive is shipped from the factory with the SCSI ID set to 7. This
 provides the drive with enough shorting straps for any ID. It must be
 remembered though that the host adapter normally takes ID 7 with all
 peripheral devices using IDs 0 through to 6.

Other Functions

  JMP4  SHORT*   Spin up at power on
        OPEN     Spin via START/STOP UNIT command
  JMP3  SHORT*   SCSI parity enabled
        OPEN     SCSI parity disabled
  JMP2  SHORT*   UNIT ATTENTION enabled
        OPEN     UNIT ATTENTION disabled
  JMP1  SHORT*   SCSI level:Common Command Set
        OPEN     SCSI level:SCSI-2

to the table of contents!!